Ballasts, Electronic, HID
HID PV C 2x35 S 220V CDM
0881892 | Manufacturer: Philips | EAN: 8711500881892 | MPN: 913700656866
Product is out of production!
More info - HID Electronic Ballast for 2x35W CDM Bulb
The HID PV C 2x35 S 220V CDM is a cost-effective solution for accent and decorative lighting in shops, public spaces, lobbies, and offices. With minimal lamp power tolerance and increased lamp life by up to 30% for CDM lamps, this single gear ballast ensures optimal performance. It features a loop-through option (in independent version), low gear energy losses, end-of-life detection, and can withstand high ambient temperatures. Enjoy long-lasting illumination with a lifetime of 40000 hours. Suitable for indoor use only.
Application code Int. Earth Loop
Rated Lamptype CDM
Rated Number of Lamps 2 piece
Rated Ballast-Lamp Power 35
Line Voltage 220 - 240 V
Line Frequency 50 - 60 Hz
Housing /S
Suitable for Outdoor use No
Automatic restart Yes
Ignition switch-off time 20 min
Ignition Voltage 4.5 (max)kV
Operating frequency 0.14 kHz
Mains voltage safety (AC) -18% /+10%
Mains voltage performance (AC) -10% /+6%
Inrush current Peak 33 (max) A
Inrush current Width 0.5ms
Earth leakage current 0.5 (max) mA
Power losses gear 8 W
Constant wattage deviation -3% /+3%
PowerFactor 100% output power 0.95 -
Overvoltage protection 320 V 48 hr
Max ballast on MCB(16 A type B) 14 ×
Hum and Noise level Inaudible
Cable-Cap outputwires mutual 120 pF
Connector type Insert
Striplength 10 - 11 mm
Wcs Ballast contacts 0.50-2.50 mm²
Active temperature protection Yes
F-marking Yes
T-case life 70 C
T-case maximum 80 (max) °C
T-ambient –20 (min), 55 (max) °C
T-storage -25 (min), 80 (max) °C
Length A1 135 mm
Fixing Hole Distance Length A2 123.5 mm
Width B1 75 mm
Fixing Hole Distance Width B2 63.5 mm
Height C1 32 mm
Fixing Hole Diameter D1 4.5 mm
PrimaVision Twin (35 W and 70W) for CDM - The cost-effective solution
• Cost-effective, plus design flexibility
• Optimal lamp performance thanks to minimal lamp power tolerance
• Lamp life increased by up to 30% for CDM lamps
Features
• Single gear for two lamps
• Loop Through feature (in independent version)
• Minimal lamp power spread
• Low gear energy losses
• Lamp end-of-life detection
• High Tambient and Tcase temperatures
• Long lifetime of 40000 hours
Applications
• 35 and 70W: accent and decorative lighting for shops, public spaces, lobbies and offices
• Suitable for indoor use only