Ballasts, Electronic
HF M blue 109 LH TL PL-S 230 240V
536808 | Manufacturer: Philips | EAN: 8711500536808 | MPN: 913700421366
More info - HF M blue 109 LH TL PL-S Ballast
The HF-Matchbox Blue is an affordable, reliable, and compact high-frequency ballast . With a robust design and meeting international safety standards, it has an energy efficiency index (CELMA EEI) of A2. Perfect for use in class I or class II luminaires, this ballast features automatic restart for hassle-free re-lamping and is suitable for emergency DC operation between 190-254V. Ideal for indoor applications such as spotlights, downlights, light boxes, and security fixtures in retail stores, office buildings, hotels, homes, and residential buildings.
Lamp Type TL/PL-S
Number of Lamps 1 piece/unit
Number of Products on MCB (16 A Type B) 159
Automatic Restart Yes
Input Voltage 230 - 240 V
Input Frequency 50 - 60 Hz
Power Factor 100% Load 0.64
Ignition Time (Max) 0.5s
Mains Voltage Performance (AC) -8%…+6%
Mains Voltage Safety (AC) –10%…+10%
Power Losses 1.7 W
Connector Type Input Terminals Insert
Color Input Terminals Blue
Color Output Terminals Grey
Connector Type Output Terminals Insert
Cable Length From Device to Lamp 1.50m
Cable Length Hot Wiring 0.30m
Wire Striplength 8.0-9 mm
Input Terminal Cross Section 0.50 - 1.50 mm²
Output Terminal Cross Section 0.50 - 1.50 mm²
Rated Ballast-Lamp Power 9 W
System Power on PL-S 9.5 W
Rated Lamp Power on PL-S 9 W
Power Loss on PL-S 1.7 W
Lamp Power on PL-S 7.8 W
Lamp Power on TL 8.2 W
Rated Lamp Power on TL 9 W
System Power on TL 10.1 W
T-Ambient (Max) 40 °C
T-Ambient (Min) –10 °C
T-Case Maximum (Max) 75 °C
Housing LH
Battery Voltage Lamp Ignition 194-254 V
IP Classification IP 20 [ Ingress Protection 20]
Approval Marks F-Marking, CE marking, VDE certificate, CB Certificate
Length A1 144 mm
Fixing Hole Distance Length A2 133 mm
Width B1 22 mm
Height C1 22 mm
Fixing Hole Diameter D1 4.2 mm
Benefits
• Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping.
• Suitable for use in class I or class II luminaires
Features
• Suitable for emergency DC operation between 190 and 254 V
• Programmed, flicker-free, pre-heated start ( < 0.8 s over 8000 on off switches one lamp depending ballast combination -Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping.
Applications
• Used with movement-detection control systems like Philips OccuPlus in applications where lamps burn for a long period of time and the switching cycle is infrequent (e.g. a maximum of three times per day)
• Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings
• Domestic applications such as outdoor garden lighting, garage areas, stairways
