915105 | Manufacturer: Philips | EAN: 8727900915105 | MPN: 927997284002
Upgrade your lighting with the Fluorescent Lamp Master TL-D 37 58W 840 G13 Power Saver Set. Save energy while enjoying bright, cool white light. Perfect for replacing standard color lamps in existing fixtures. fluorescent, lamp, tl, 37, 58w, 840, g13, power, saver
Cap-Base G13 [Medium Bi-Pin Fluorescent]
Bulb T8 [26 mm]
Life System to 10% failures 15000 h
Life System to 50% failures 20000 h
SSF EM 2000 h Rated,3h cycle 100%
SSF EM 4000 h Rated,3h cycle 99%
SSF EM 6000 h Rated,3h cycle 98%
Color Code 840 [CCT of 4000 K]
Color Rendering Index 82 Ra8
Color Designation Cool White
Color Temperature 4000 K
Syst Lum Flux 25 °C, Nom,@10kh 3360 lm
SystLum Flux 25 °C, Rated,@10kh 3360 lm
SLMF EM 2000 h Rated 96%
SLMF EM 4000 h Rated 94%
SLMF EM 6000 h Rated 94%
Chromaticity Coordinate X 383 -
Chromaticity Coordinate Y 386 -
System Wattage 48 W
System Wattage EM 25 °C, Nom 48 W
System Wattage EM 25 °C, Rated 48 W
Dimmable No
Energy Efficiency Label (EEL)A
Mercury (Hg) Content 2 mg
Energy consumption kWh/1000 h 43 kWh
Base Face to Base Face A 1500 (max) mm
Insertion Length B 1504.7 (min), 1507.1 (max) mm
Overall Length C 1514.2 (max) mm
Diameter D 28 (max) mm
Features
• Up to 30% energy saving, while maintaining the lighting level compared to a TL-D Standard colors lamps (halophosphate), is achieved by an intelligent electronic starter in combination with the most efficient fluorescent TL-D lamp
• Designed for operation on electromagnetic gear only
• Full thermal safety monitoring which cuts off defective or end-of-life lamps
• Instant flicker-free ignition (nom. 2seconds)
• Can be ignited from –15 to +50 °C
• Product range is RoHS-compliant
• Product range is covered by WEEE
Applications
• Suitable to replace TL-D Standard colors lamps (halophosphate) in all existing TL-D luminaires with electromagnetic gear (220 - 240 V, 50 Hz). Use on 60 Hz and/or 110 V systems leads to non-functionality of the system.
• Can also be used to replace MASTER TL-D Super 80 lamps, but the light output of the total installation will then be reduced by approximately 20%.
Write your own review
Write a review
We expect certain standards in the content of your reviews. We will not publish comments or reviews that contain abusive language, inappropriate language or are blatantly unfair.
No products