Master TL-D 37 58W 865 G13 Power Saver Set

Cap-Base G13 [Medium Bi-Pin Fluorescent]
Bulb T8 [26 mm]
Life System to 10% failures 15000 h
Life System to 50% failures 20000 h
SSF EM 2000 h Rated,3h cycle 100%
SSF EM 4000 h Rated,3h cycle 99%
SSF EM 6000 h Rated,3h cycle 98%
Color Code 865 [CCT of 6500 K]
Color Rendering Index 82 Ra8
Color Designation Cool Daylight
Color Temperature 6500 K
Syst Lum Flux 25 °C, Nom,@10kh 3215 lm
SystLum Flux 25 °C, Rated,@10kh 3215 lm
SLMF EM 2000 h Rated 96%
SLMF EM 4000 h Rated 94%
SLMF EM 6000 h Rated 94%
Chromaticity Coordinate X 313 -
Chromaticity Coordinate Y 338 -
System Wattage 48 W
System Wattage EM 25 °C, Nom 48 W
System Wattage EM 25 °C, Rated 48 W
Dimmable No
Energy Efficiency Label (EEL)A
Mercury (Hg) Content 2 mg
Energy consumption kWh/1000 h 43 kWh
Base Face to Base Face A 1500 (max) mm
Insertion Length B 1504.7 (min), 1507.1 (max) mm
Overall Length C 1514.2 (max) mm
Diameter D 28 (max) mm

Features
• Up to 30% energy saving, while maintaining the lighting level compared to a TL-D Standard colors lamps (halophosphate), is achieved by an intelligent electronic starter in combination with the most efficient fluorescent TL-D lamp
• Designed for operation on electromagnetic gear only
• Full thermal safety monitoring which cuts off defective or end-of-life lamps
• Instant flicker-free ignition (nom. 2seconds)
• Can be ignited from –15 to +50 °C
• Product range is RoHS-compliant
• Product range is covered by WEEE

Applications
• Suitable to replace TL-D Standard colors lamps (halophosphate) in all existing TL-D luminaires with electromagnetic gear (220 - 240 V, 50 Hz). Use on 60 Hz and/or 110 V systems leads to non-functionality of the system.
• Can also be used to replace MASTER TL-D Super 80 lamps, but the light output of the total installation will then be reduced by approximately 20%.

General safety informations