Optotronic OT 6 200 240V 24V CE IP65 LED

Output power 6 W
Input voltage 180…254 V
Mains frequency 50 - 60 Hz
Output voltage 24 V
ECG efficiency 80%
Nominal voltage 200…240 V
Nominal current 0.08 A
Device power loss 1.5 W
Power factor λ N/A
Inrush current 15 A
Max. no. of ECGs on circuit breaker 10 A 30
Max. no. of ECGs on circuit breaker 16 A 48
Galvanic isolation primary/secondary 3 kV
Surge capability (L-N) 1 kV
Length 51 mm
Width 50 mm
Height 22 mm
Cable cross-section, input side 1 mm²
Cable cross-section, output side 1 mm²
Wire preparation length, input side 10 mm
Casing material Plastic
Ambient temperature range –20…+50 °C
Maximum temperature at tc test point 70 °C
Max.housing temperature in case of fault 100 °C
ECG lifetime 50000 h
Dimmable Yes (With OPTOTRONIC dimmers)
Suitable for fixtures with prot. class II
Overheating protection Automatic reversible
Overload protection Automatic reversible
Short-circuit protection Automatic reversible
No-load proof Yes
Maximum wiring length ECG/lamp 10m
Type of protection IP65
Standards acc. to IEC 61347-2-13/acc. to IEC 62384/acc. to EN 55015/acc. to IEC 61000 - 3-2/acc. to IEC 61000 - 3-3/acc. to IEC 61547
Approval marks - approval CE / VDE / ENEC 10

Benefits
• Very high efficiency and reliability
• Versatile scope of application due to output power range of up to 240 W
• Constant luminous flux for very low and high temperatures due to Smart Power Supply

Applications
• Suitable for indoor and outdoor SELV installations
• Suitable for use in tight, flat luminaires or installation in suspended ceilings
• Outdoor applications only in suitable luminaires

General safety informations