Ballasts, Electronic
HF M red 118 SH PL-C PL T 230 240V
928023 | Manufacturer: Philips | EAN: 8711500928023 | MPN: 913700423466
More info - HF M red 118 SH PL-C T 230V Ballast
The HF-Matchbox Red is an affordable, reliable, and compact high-frequency ballast . It meets international safety standards and has a CELMA EEI of A2. Perfect for indoor applications like spotlights and downlights, it can be operated with movement-detection control systems. With automatic restart and flicker-free start, this ballast ensures hassle-free re-lamping and a long lifespan. Suitable for use in class I or class II luminaires, it's the ideal choice for retail stores, office buildings, hotels, homes, and more.
Lamp Type PL-C/PL-T
Number of Lamps 1 piece/unit
Number of Products on MCB (16 A Type B) 73
Automatic Restart Yes
Input Voltage 230 - 240 V
Input Frequency 50 - 60 Hz
Power Factor 100% Load 0.62
Ignition Time (Max) 0.45 s
Mains Voltage Performance (AC) -8%…+6%
Mains Voltage Safety (AC) –10%…+10%
Power Losses 2.0-2.1 W
Connector Type Input Terminals Insert
Color Input Terminals Orange
Color Output Terminals Grey
Connector Type Output Terminals Insert
Cable Length From Device to Lamp 1.50m
Cable Length Hot Wiring 0.30m
Wire Striplength 8.0-9 mm
Input Terminal Cross Section 0.50 - 1.50 mm²
Output Terminal Cross Section 0.50 - 1.50 mm²
Rated Ballast-Lamp Power 18 W
Rated Lamp Power on PL-T 18 W
System Power on PL-T 17.3 W
Power Loss on PL-T 2.1 W
Lamp Power on PL-T 15.2 W
System Power on PL-C 17.9 W
Rated Lamp Power on PL-C 18 W
Power Loss on PL-C 2 W
Lamp Power on PL-C 15.9 W
T-Ambient (Max) 40 °C
T-Ambient (Min) –10 °C
T-Case Maximum (Max) 75 °C
Housing SH
Battery Voltage Lamp Ignition 194-254 V
IP Classification IP 20 [ Ingress Protection 20]
Approval Marks F-Marking, CE marking, ENEC certificate, CB Certificate
Length A1 80 mm
Fixing Hole Distance Length A2 70 mm
Width B1 40 mm
Height C1 22 mm
Fixing Hole Diameter D1 4.4 mm
Benefits
• Can be operated with movement-detection control systems.
• Automatic restart (after voltage dip or lamp exchange) ensures easy operation and hassle-free re-lamping.
• Suitable for use in class I or class II luminaires
Features
• Over 60000 on/off switches on one lamp (depending on lamp/ballast combination)
• Suitable for emergency DC operation between 190 and 254 V
• Programmed, flicker-free, pre-heated start (<0.8 swhichallowsthelamptobeswitchedonandoffwithoutreducingusefullifep>
Applications
• Used with movement-detection control systems like Philips OccuPlus
• Mainly for indoor applications such as spotlights, downlights, light boxes, and emergency and security fixtures used largely in retail stores, office buildings, hotels, private homes and residential buildings
• Domestic applications such as outdoor garden lighting, garage areas, stairways
