Ballasts, Electronic, HID
PTI 70 220 240 I
099501 | Manufacturer: Osram | EAN: 4008321099501 | MPN: PTI-70-I
More info - PTI 70 220 240 I HID Electronic Ballast
The PTI 70 220 240 I is a POWERTRONIC INTELLIGENT PTi I ECG designed for HID lamps. With its cable clamp, it ensures reliable strain relief and extended terminal section for mains looping. This product offers a long and reliable life at maximum temperatures, along with automatic safety shutdown in case of defects or end of life (EoL). Perfect for shop lighting, health and fitness areas, as well as effect and accent lighting.
Lamp wattage 73 W
Line current 0.36 A
Ignition voltage 4.5 kVp
Operating frequency 0200…0.240 kHz
System wattage 79 W
ECG efficiency 92%
Input voltage 220 - 240 V
Voltage range 198 - 264 V
Mains frequency 50 - 60 Hz
Power factor λ 0.95
Inrush current 45 A
Max. no. of ECGs on circuit breaker 10 A 7
Max. no. of ECGs on circuit breaker 16 A 13
Max. no. of ECGs on 16 A MCB with EBN-OS 32
Maximum current for mains looping 16 A
Protective conductor current 0.3 mA
U-OUT 250 V
Max. working voltage between LH and LL 250 V
Max. working voltage betw. LL/LH and earth 250 V
Max. capacitance of wire ECG/lamp 120 pF
Length 171 mm
Width 83 mm
Height 32 mm
Mounting hole spacing, length 163 mm
Cable cross-section, input side 0.75-2.5 mm²
Cable cross-section, output side 0.75-2.5 mm²
Wire preparation length, input side 10…11 mm
Wire preparation length, output side 10…11 mm
Casing material Plastic
Ambient temperature range –25…+50 °C
Maximum temperature at tc test point 80 °C
ECG lifetime 50000 h
Design / version With cable clamp
System guarantee level 3c
Maximum wiring length ECG/lamp 1.5m
Overheating protection Power reduction and switch off at T > 80 °C at the tc point
Overvoltage protection at 275…300 V 48 h
Overvoltage protection at 300…320 V 2 h
Overvoltage protection at 320…350 V 5 min
ECG reset time > 0.5s
Cable types, input side NYM-J 3 × 1.5 / NYM-J 3 × 2.5 / H05 VV-F 3 × 1.5 / NHXMH-J 3 × 1.5 mm²
Cable types, output side SIHF-J 3 × 1.5 / SIHF-J 3 × 2.5 / SIHSI 3 × 1 mm²
Dimmable No
Restriction on ignition time 20 min
Suitable for fixtures with prot. class I
Approval marks - approval ENEC 10 / VDE / VDE-EMC / GOST / C-Tick
Type of protection IP20
EEI - Energy Label A2
Standards acc. to EN 61347-2-12/acc. to EN 55015/acc. to EN 61000 - 3-2/acc. to EN 61547/acc. to EN 62493
Benefits
• Extended terminal section enables mains looping
• Screw-down cable clamps for reliable strain relief
• Long reliable life at maximum permitted temperatures
• Automatic safety shutdown of lamps in the event of a defect or at end of life (EoL)
Areas of application
• Shop lighting
• Health and fitness areas
• Effect and accent lighting
